Home / Industry News

News

AOHI AOC-C024 170W PD3.2 Charger โ€” 2C1A Output, LCD Display, AHB Half-Bridge and 200W Boost Mode

2026-10-29 ยท Compiled by Best IT Parts from public industry reporting

AOHI has introduced the AOC-C024, a 170W PD3.2 charger that combines an LCD status screen, Bluetooth app control and over-the-air protocol updates in a single enclosure. The unit has passed CCC certification and uses folding prongs for travel. Dimensions are about 80 x 74.5 x 36 mm at roughly 360 g, with a 2C1A port layout set inside a yellow accent frame.

Each USB-C port is rated 140W on its own and the USB-A port 30W, for 170W total system output. Supported protocols cover PD3.2, PD3.1, PPS, QC, FCP, SCP, AFC and DCP. The USB-C ports implement PD3.2 SPR AVS, quoted at up to 60W of dynamically adjusted charging for the iPhone 18 series.

The power stage uses an AHB half-bridge topology with GaN 6.0 switching devices and an AI thermal control algorithm, backed by nine protection layers spanning ESD, overtemperature, overvoltage, overcurrent, short circuit and flame-retardant requirements. An AI dynamic power allocation scheme holds a single port at a continuous 140W and rebalances the remaining budget when devices are added or removed, without restarting charging on the ports already in use.

Three operating modes โ€” smart, boost and custom โ€” let the user choose a power strategy, and a 200W overclock boost mode sits above the standard 170W envelope. Through the Bluetooth link, the companion app reports per-port output, total output, temperature and the active mode, switches individual ports on or off, and trims each port in 1W steps. The same app channel carries protocol OTA updates and UI revisions, so protocol maintenance and display changes do not depend on firmware replacement.

Need this part in volume?

Best IT Parts supplies wholesale laptop power adapters, server power supplies and replacement parts, with OEM/ODM and private-label options.

Request a quotation

Technical details are reproduced as reported. Verify specifications against the original source before design or procurement decisions.

โ† All industry news